Ten Security Lock For Van That Will Actually Change Your Life

· 6 min read
Ten Security Lock For Van That Will Actually Change Your Life

Choosing the Right Security Lock For Your Van

Choosing the right security lock for your van can assist in stopping thieves and safeguard your cargo. Certain locks are designed to be used for DIY installation, but others require help from a professional to ensure that they are fitted correctly and provide maximum security.

Slam locks are ideal for couriers who make multiple deliveries. They automatically lock when the door is closed. Deadlocks are designed to work with the manufacturer's lock and offer an additional layer of security.



Dead Locks

Van dead locks are a second physical security measure that provides a strong deterrent to criminals. These aftermarket locks are specially designed and extend through the van door. They connect to the frame so that they aren't able to be opened without a key. These locks are ideal for vans that have to be kept overnight, or are carrying expensive equipment.

They're perfect for people who prefer the factory remote locking system in the day, but want to add a layer of security in the night or if they feel their vehicle is in a hazard location. When operated by a key, they throw a bolt into a receiver attached to the opposite body part of the vehicle.  van security hook locks  adds an additional layer of security above the locks that are factory installed.

In contrast to Slam locks and Hook Locks (both available in our online store) which can be locked automatically when the door is shut These locks require the user to operate them using the supplied key. A straight bar lock is ideal for rear doors and twin sliding door, while a hook lock can be used on rear or front doors of small to medium vans.

Both are designed to prevent a thief from attempting to break into the lock and forcing it to open, something that could otherwise allow them access to the vehicle's cab or load area. They're designed specifically for each model of van and are positioned in the ideal position to provide a second layer of protection against a specific attack techniques.

The consequences of van theft is significant, especially for professionals like tradesmen and contractors who rely on vehicles to transport essential tools and equipment they cannot afford to lose. It can cost money to replace stolen items, but it can cause loss of income due to unplanned downtime or the hassle of finding another transportation. Installing a van lock that is of good quality will protect your possessions, decrease the risk and discourage thieves. It could even help you save on insurance premiums.

Hook Locks

A hook lock is an effective way to deter theft in vans. It fits on the door of your vehicle. It works independently from the manufacturer's locks and can only be operated by a key that is fully controlled by the driver. It features an open-ended bolt that can't be pushed open and is made of high-quality materials. It's also highly resistant to manipulation and drilling. Sold Secure is the UK's most trusted security testing body. Many models are designed to meet the requirements of police and are certified by Sold Secure.

Consider how much protection your van requires prior to purchasing security locks. If you're carrying expensive tools or sensitive cargo, then a more sophisticated lock, such as a deadlock or slam, is the best choice. On the other hand, if you're only carrying items of lesser value or tools, a simple slam lock may suffice. You should also examine your insurance policy to make sure that adding additional locking mechanisms will not invalidate it.

Another thing to take into consideration when selecting the right security lock is its weather resistance. Since vans are often exposed to elements, your locks should be able to endure various weather conditions. This way, they won't lose their effectiveness and will be more difficult for thieves to manipulate. In addition, it is important to ensure that you are up-to-date with software updates for electronic locking systems in order to guard against security issues and improve their performance.

It is essential to select locks that are easy to install. Some models are made for DIY installation, whereas others require professional installation to ensure that they're fitted correctly and function as intended. Your level of expertise, confidence and the resources you have at hand will determine if you require a professional to install the product.

Catalytic Converter Locks

Catalytic converters reduce harmful emissions from your car. But, this essential component is also a target for thieves because of the precious metals it contains. The black market value of these precious materials has led to a rise in the amount of stolen converters. There are preventive measures available to combat this issue.

Many people assume that a simple security system is sufficient but they're not as efficient than a device that is designed specifically to protect your converter. These devices are designed to detect vibrations or heat, and then emit a loud roar to deter thieves. These devices are closer to deterrents than protection systems, and tend to cost more than a standard lock.

The Cat Clamp converter lock, with a patent-pending design is a tried and tested solution to stop the theft of catalytic converts. The device is constructed of a stainless steel wire which runs around the catalytic converter and the frame of the car. The cable is wrapped up to seven times, and is locked, making it extremely difficult for thieves to take away the converter. This unit can be installed in less than 30 minutes and does not require drilling or welding. It is simple to install on a range of vehicles and is suitable for use on cars, trucks or SUVs, vans and other vehicles equipped with the catalytic converter.

A metal plate covering the entire catalytic converter is another option to protect it. While it is not as simple to install as a cage made of metal, it does make the converter much more difficult to steal. The price of these plates can run anywhere from $150 to $270, based on the brand.

It is important to remember that no security system is perfect, but taking preventive measures can greatly reduce the chance of theft. Taking the time to properly secure your van will ensure that your possessions and yourself are secure, and could help you avoid the cost of replacing a high-cost component. It is also a good idea to have your catalytic converter marked with your VIN number to help identify it should it be recovered and resold.

Anti-Peel Kits

This solution is designed to guard against the infamous "Peel and Steal" technique. It is installed on the front edge of the side-loading door on a vehicle. This improves the resistance of your van's doors to 'peel-and-steal attacks by as much as 300 percent. The L4V Anti-Peel Kit, in combination with a well-placed hook lock, decreases the possibility that thieves can gain access to your van via the side-loading door.

It is crucial to implement additional security measures for vans due to the growing amount of van crimes and thefts. One of the most recent methods is known as 'peel and steal' and involves thieves stealing items and tools from vans in seconds by applying pressure to the doors with their knees then pulling, bending and prising them open to reveal the contents of the load area. This kind of attack is now a common occurrence which has cost tradespeople throughout the UK thousands of dollars in stock and tools lost.

Locks 4 Vans has launched an innovative high hook lock and an anti peel kit that was designed to solve this growing problem. The Anti-Peel Kit, fitted to the barn door of your Ford Custom, reduces the risk of 'peel-and steal attacks by enforcing the door's skin and putting in a second layer of security. The high-quality hook locks adds additional strength to the barn door and ensures it is secure in the event that the anti-peel plates are removed.

Our anti-peel kits are available to buy on the internet and delivered directly to your vehicle in just a few days. Our engineers will install the products.  ford van security locks  are based in Greater Manchester and Tameside, so we can offer our services to areas such as Manchester Salford, Ashton Under Lyne Oldham Rochdale.

If you'd like more information on how to improve the security of your van please get in touch with us today. We have a number of different options that can aid you in improving the security for your van, from deadlocks, armour locks and even shielding to protect against attacks by puncture.